User Manual Q&AAnswer
Jan 28, 2025 - 05:16 AM
The installation of the Philips Hue 802033 Lucca White Outdoor Wall Light is relatively simple. It requires wiring the fixture to the mains and attaching it to an existing electrical box. Here are the steps:
1. Turn off the power supply to the electrical box where you will be installing the wall light.
2. Remove the existing fixture, if any, from the electrical box.
3. Attach the enclosed bracket to the electrical box using the provided screws.
4. Connect the wires from the electrical box to the corresponding wires on the wall light fixture. Typically, this involves connecting the black (hot) wire to the black wire, the white (neutral) wire to the white wire, and the green or bare wire (ground) to the ground wire. Make sure to securely tighten the wire connections.
5. Once the wiring is complete, attach the outer casing's mount (which has the bulb socket) onto the bracket and secure it with screws.
6. xxxx in the included bulb into the bulb socket.
7. Finally, seat the outer casing onto the mount, aligning the xxxx holes, and secure it with the provided screws.
Please note that it is essential to follow the applicable installation code and have a person familiar with the construction and operation of the product and the associated hazards perform the installation.
For more detailed instructions and safety guidelines, refer to the user manual provided with the product.
Add New Comment