User Manual Q&AAnswer
Jan 28, 2025 - 04:09 AM
To connect your EPSON PowerLite 84+ Multimedia Projector to your computer, follow these steps:
1. Ensure that both your projector and computer are turned off.
2. Locate the computer cable that came with your projector. This cable should have a VGA connector on one end and a D-sub 15-pin connector on the other end.
3. Connect the VGA connector of the computer cable to the Computer1 or Computer2 port on the back of the projector.
4. Connect the D-sub 15-pin connector of the computer cable to the VGA port on your computer.
5. Turn on your computer.
6. Turn on your projector by pressing the Power button.
7. Use the Source Search button on the projector or the remote control to select the Computer1 or Computer2 input source, depending on which port you connected the computer cable to.
8. If necessary, adjust the projector's focus and zoom settings to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the EPSON PowerLite 84+ Multimedia Projector User's Guide provided in the link you provided.
Add New Comment