User Manual Q&AAnswer
Jan 28, 2025 - 03:56 AM
To connect your Viewsonic PJ1165 LCD projector to your computer, follow these steps:
1. Make sure both the projector and the computer are turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is a blue trapezoid-shaped connector, while the HDMI port is a small rectangular connector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on the projector and the computer.
7. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display Settings" or "Screen Resolution."
8. In the display settings, select the appropriate display mode for the projector. You may need to choose "Duplicate" or "Extend" to enable the projector as a secondary display.
9. Adjust the focus and other settings on the projector as needed.
For more detailed instructions and troubleshooting tips, please refer to the Viewsonic PJ1165 LCD Projector User Guide.
Add New Comment