User Manual Q&AAnswer
Jan 28, 2025 - 02:43 AM
To install the Centralite 3200-C-P Temperature and Humidity Sensor, follow these steps:
1. Join the Open ZigBee Network: Enable the ZigBee network for joining via the interface on your controller or hub.
2. Pull Tab from Sensor's Bottom: Remove the tiny plastic tab from the bottom of the sensor. This will initiate the search for a network to join.
3. Complete Joining at Hub (Optional): Some hubs and controllers may require additional procedures, such as giving the device a name or category.
For more detailed instructions and troubleshooting tips, please refer to the instruction guide provided with the sensor.
Add New Comment