User Manual Q&AAnswer
Jan 28, 2025 - 02:21 AM
To install the WAC Lighting F-056L-MB Smart Fans Stella Indoor, follow these steps:
1. Safety: Ensure that the fan is not damaged or missing any parts before installation. Use only the supplied parts and accessories designated for use with this product by WAC. Do not use power tools during installation to avoid improper assembly and potential damage or injury.
2. Mounting: Choose the appropriate mounting option for your outlet box. Pass the supply wires through the mounting bracket and secure them to your cUL/UL outlet box using the pre-installed screws. Use the provided hardware to attach the mounting bracket to the outlet box.
3. Attaching the Fan Blades: Place the blades on the motor housing and secure them with the blade attachment screws and washers. Repeat this step for all the blades.
4. Hanging the Fan: Remove the xxxx from the hanger ball and remove the hanger ball and cross pin. Loosen the screws, clevis pin, and cotter pin. Install the coupling cover, canopy xxxx ring, canopy, and downrod assembly into the motor housing. Align the downrod and motor collar holes, then re-insert the pins and screws. Slip up the canopy and canopy xxxx cover. Re-install the hanger ball with the cross pin in the correct place. Secure the safety cable into the structure beams using the provided wood xxxx , washers, and spring washers. Slide the receiver facing down.
5. Making the Electrical Connections: Connect the labeled wires from the fan to the corresponding wires on the receiver. Connect the labeled wires from the outlet box to the corresponding wires on the receiver. After making the electrical connections, secure all connections with wire ties, nuts, and electrical tape. Spread the wires apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box and the ungrounded connector on the other side of the outlet box.
6. Installing the Optional Wall Control: If desired, install the optional wall control by connecting the wires according to the provided wiring diagram. Secure the wall control with the provided screws and attach the wall mounting plate over the wall switch.
7. Finishing the Installation: Install the canopy to the mounting bracket using the xxxx removed in step 2. Twist the canopy into place and install the canopy xxxx ring. If applicable, install the adapter plate and luminaire cover according to the provided instructions.
For more detailed instructions and illustrations, please refer to the WAC Lighting F-056L-MB Smart Fans Stella Indoor User Guide.
Add New Comment