User Manual Q&AAnswer
Jan 28, 2025 - 01:37 AM
To connect your Optoma EP-771 Multimedia Data Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate your desktop to the projector. This may vary depending on your computer's operating system.
8. Adjust the projector settings, if necessary, to ensure the image is properly displayed.
For more detailed instructions and troubleshooting tips, please refer to the Optoma EP-771 Multimedia Data Projector User Manual.
Add New Comment