User Manual Q&AAnswer
Jan 28, 2025 - 01:36 AM
To connect your Panasonic PT-FW100NTU Smart LCD Projector to your computer, follow these steps:
1. Ensure that your computer and the projector are both turned off.
2. Locate the computer input terminals on the back of the projector. These terminals are labeled "Computer 1" and "Computer 2."
3. Connect one end of the VGA cable (not included) to the VGA output port on your computer.
4. Connect the other end of the VGA cable to the corresponding computer input terminal on the projector. If you are using Computer 1, connect it to the "Computer 1" terminal. If you are using Computer 2, connect it to the "Computer 2" terminal.
5. If your computer has an HDMI output, you can also connect it to the HDMI input terminal on the projector using an HDMI cable (not included). This will provide a digital connection and may offer better image quality.
6. Once the cables are securely connected, turn on your computer and the projector.
7. Use the projector's remote control to select the appropriate input source. Press the "Input" button and choose either "Computer 1" or "Computer 2" depending on which input terminal you connected your computer to.
8. Your computer's display should now be projected onto the screen.
For more detailed instructions and troubleshooting tips, please refer to the Panasonic PT-FW100NTU Smart LCD Projector Instructions Manual provided in the link above.
Add New Comment