User Manual Q&AAnswer
Jan 28, 2025 - 01:33 AM
To connect your laptop to the InFocus IN104 Portable DLP Projector, follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the VGA or HDMI port on your laptop. Most laptops have a VGA port, but some newer models may have an HDMI port.
3. Connect one end of the VGA or HDMI cable to the corresponding port on your laptop.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled as "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Power on the projector and then turn on your laptop.
7. On your laptop, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display Settings" or "Screen Resolution."
8. In the display settings, select the option to extend or duplicate your laptop's display to the projector. This may vary depending on your operating system.
9. Adjust the focus and zoom on the projector to ensure a clear and properly sized image.
10. You should now see your laptop's display on the projector.
For more detailed instructions and troubleshooting tips, refer to the user guide provided with the InFocus IN104 Portable DLP Projector.
Add New Comment