How do I program the keypad on the Honeywell ‎8812309S Safes & Door Locks? (Honeywell Safes & Door Locks User Guide)

Answer

manuals.plus

Jan 28, 2025 - 12:03 AM

To program the keypad on the Honeywell ‎8812309S Safes & Door Locks, follow these steps:

1. Wake up the lock by pressing any button on the keypad.
2. Input the Administrator Passcode (AP) provided in the Honeywell App under Lock Settings. The green light and a beep will indicate a successful programming step.
3. To customize passcodes received from the app, input the AP, followed by "1". The green light and a beep will indicate a successful programming step. You can then input the Received Passcode (RP), New Passcode (NP), and repeat the New Passcode. The green light and a beep will indicate a successful programming step.
4. To enable or disable the Auto-Lock function, input the AP, followed by "5". Input the desired time in seconds (20 - 900 seconds) or "00" to turn off Auto-Lock. The green light and a beep will indicate a successful programming step.
5. To turn off the sound, input the AP, followed by "6" and "1". The green light and a beep will indicate a successful programming step. To turn on the sound, input the AP, followed by "6" and "2". The green light and a beep will indicate a successful programming step.
6. To restore factory settings, press the reset button on the PCB board inside the back panel of the lock until you hear one beep. Release the button, and three seconds later, you will hear a second beep. This indicates that the lock has been reset to the factory settings.
7. To add an administrator, wake up the lock by pressing any button on the keypad and use the Honeywell App to connect to the lock.

Please refer to the user guide provided with the Honeywell ‎8812309S Safes & Door Locks for more detailed instructions and additional programming options.