Answer

Jan 27, 2025 - 11:48 PM
To install the Arlo AVD1001 Essential Wired Video Doorbell, please follow the steps outlined in the user manual provided. Here is a step-by-step guide:
1. Before installation, ensure that you have the necessary tools, including a screwdriver, drill, level, and wire stripper.
2. Choose a suitable location for the doorbell. It should be near your existing doorbell wiring and within the Wi-Fi range.
3. Turn off the power to your existing doorbell at the circuit breaker.
4. Remove your existing doorbell button and disconnect the wires.
5. Connect the wires from your existing doorbell to the Arlo AVD1001 Essential Wired Video Doorbell. The manual provides a detailed diagram of the wiring connections.
6. Attach the mounting plate to the wall or doorframe using the provided screws.
7. Connect the doorbell to the mounting plate by aligning the slots and sliding it into place until it clicks.
8. Adjust the angle of the doorbell by loosening the adjustment xxxx and rotating it to the desired position. Tighten the xxxx once you have set the angle.
9. Turn on the power to your doorbell at the circuit breaker.
10. Download and install the Arlo app on your smartphone or tablet.
11. Follow the in-app instructions to set up the doorbell and connect it to your Wi-Fi network.
12. Once the setup is complete, you can customize the doorbell settings, such as motion detection sensitivity and notification preferences, through the Arlo app.
For more detailed instructions and illustrations, please refer to the user manual provided for the Arlo AVD1001 Essential Wired Video Doorbell.
Add New Comment