User Manual Q&AAnswer
Jan 27, 2025 - 11:43 PM
To connect your ViewSonic PJD6223 Multimedia Smart DLP Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the VGA or HDMI cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the projector settings, if needed, using the projector's remote control or on-screen menu.
For more detailed instructions and illustrations, please refer to the ViewSonic PJD6223 Multimedia Smart DLP Projector User Guide, specifically the section on "Connecting the Projector to a Computer" (page 10) in the provided manual.
Add New Comment