User Manual Q&AAnswer
Jan 27, 2025 - 11:41 PM
To connect your NEC NP115 DLP Smart Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate the display to the projector.
8. Adjust the projector settings if necessary. You can refer to the user manual for detailed instructions on adjusting settings such as brightness, contrast, and aspect ratio.
Please note that the specific steps may vary depending on your computer's operating system and the type of cable you are using. It is recommended to consult the user manual for your specific model of the NEC NP115 DLP Smart Projector for detailed instructions and troubleshooting tips.
Add New Comment