User Manual Q&AAnswer
Jan 27, 2025 - 11:40 PM
To connect your Sanyo PLC-XT10A Multimedia Digital Projector to your computer, you will need to follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the computer input port on the back of the projector. It is labeled "Computer 1" and has a VGA (D-sub 15-pin) connector.
3. Take the VGA cable that came with the projector and connect one end to the computer's VGA output port.
4. Connect the other end of the VGA cable to the "Computer 1" input port on the projector.
5. Once the cable is securely connected, turn on both the projector and your computer.
6. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate the display onto the projector. This may vary depending on your operating system.
8. Adjust the projector's focus and zoom as needed to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the Sanyo PLC-XT10A Multimedia Digital Projector Owner's Manual, specifically the section on "Connecting to a Computer." You can access the manual using the link provided.
Add New Comment