User Manual Q&AAnswer
Jan 27, 2025 - 10:15 PM
To charge the iBobber, follow these steps:
1. Ensure that the iBobber is clean.
2. Align the "bumps" on the white side of the iBobber with the grooves in the charger cradle.
3. Gently push the bobber into the charger, twisting it clockwise so the "bumps" slide horizontally through the grooves.
4. Plug the charging cable into a computer USB port or a USB adapter connected to a wall outlet.
5. Charging will be indicated by a solid blue ring of light around the iBobber.
6. The light will remain on until the iBobber is fully charged, then it will flash to indicate a full charge.
7. Once fully charged, the iBobber can be disconnected from the charger and used for up to 25 minutes.
Note: Do not leave the iBobber in the charger after it is fully charged, as this can slowly drain the battery.
Add New Comment