User Manual Q&AAnswer
Jan 27, 2025 - 10:48 AM
To connect your Epson BrightLink 455Wi DLP Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the computer video cable (VGA cable) that came with your projector.
3. Connect one end of the VGA cable to the VGA port on your computer.
4. Connect the other end of the VGA cable to the Computer1/2/3 port on the projector, depending on which port you prefer to use.
5. If your computer has an HDMI output and you prefer to use HDMI instead of VGA, you can connect an HDMI cable from your computer to the HDMI port on the projector.
6. Once the cables are connected, turn on your computer and projector.
7. On your computer, go to the display settings and select the appropriate display mode for the projector. This may involve extending or duplicating your desktop.
8. Adjust the focus and zoom on the projector to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the Epson BrightLink 455Wi DLP Projector User's Guide provided in the link.
Add New Comment