User Manual Q&AAnswer
Jan 27, 2025 - 10:46 AM
To connect your computer to the InFocus IN3914 Interactive DLP Projector, follow these steps:
1. Ensure that both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Depending on the type of connection your computer supports, use a VGA or HDMI cable to connect the corresponding port on your computer to the projector's port.
4. Once the cable is securely connected, turn on your computer.
5. Turn on the projector and wait for it to power up.
6. On your computer, go to the display settings and select the appropriate display mode (e.g., duplicate, extend, or projector only) to enable the projector as a secondary display.
7. Adjust the projector's focus and zoom settings, if necessary, to ensure a clear and properly sized image.
8. You should now see your computer's display projected onto the screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided for the InFocus IN3914 Interactive DLP Projector.
Add New Comment