User Manual Q&AAnswer
Jan 27, 2025 - 10:43 AM
To connect your device to the InFocus IN36 Digital Projector, follow these steps:
1. Make sure the projector and your device are powered off.
2. Locate the appropriate video input port on the projector. The IN36 Digital Projector has various input ports, including VGA, HDMI, S-Video, and Composite.
3. Depending on the output port of your device, choose the corresponding cable to connect it to the projector. For example, if your device has a VGA output, use a VGA cable; if it has an HDMI output, use an HDMI cable.
4. Connect one end of the cable to the output port of your device and the other end to the corresponding input port on the projector.
5. Once the cable is securely connected, power on both the projector and your device.
6. On the projector's remote control, press the "Source" or "Input" button to select the input source that matches the port you connected your device to.
7. Adjust the projector's focus and keystone settings, if necessary, to ensure a clear and properly aligned image.
8. Your device's screen should now be displayed through the projector. If not, check the cable connections and make sure your device's output is set to the correct resolution.
For more detailed instructions and troubleshooting tips, refer to the InFocus IN36 Digital Projector User's Guide provided in the link above.
Add New Comment