User Manual Q&AAnswer
Jan 27, 2025 - 10:34 AM
To connect the LOVEPET 617-196 Portable Home Projector to your devices, follow these steps:
1. VGA Connection:
- Connect one end of a VGA cable to the VGA port on the projector.
- Connect the other end of the VGA cable to the VGA port on your laptop or computer.
- Make sure the projector is set to the VGA input source.
2. USB Connection:
- Connect one end of a USB cable to the USB port on the projector.
- Connect the other end of the USB cable to the USB port on your laptop or computer.
- Make sure the projector is set to the USB input source.
3. HDMI Connection:
- Connect one end of an HDMI cable to the HDMI port on the projector.
- Connect the other end of the HDMI cable to the HDMI port on your laptop, smartphone, or other HDMI-enabled device.
- Make sure the projector is set to the HDMI input source.
4. AV Connection:
- Connect one end of an AV cable (3.5mm to RCA) to the AV port on the projector.
- Connect the other end of the AV cable to the AV output of your device (if available).
- Make sure the projector is set to the AV input source.
5. TV Connection:
- Connect one end of an HDMI cable to the HDMI port on the projector.
- Connect the other end of the HDMI cable to the HDMI port on your TV.
- Set your TV to the corresponding HDMI input source.
Note: For SD and VGA connections, you may need to adjust the display settings on your device to ensure compatibility with the projector's resolution (640 x 480).
Please refer to the LOVEPET 617-196 Portable Home Projector's instruction manual for more detailed instructions and troubleshooting tips.
Add New Comment