User Manual Q&AAnswer
Jan 27, 2025 - 10:31 AM
To set up the Artograph EZ Tracer Projector, please follow these steps:
1. Unpack the projector and ensure that all the components are included.
2. Place the projector on a stable tabletop surface, ensuring that it is positioned securely.
3. Connect the projector to a grounded electrical outlet using the provided power cord.
4. If you need to use an extension cord, make sure it has a suitable current rating to prevent overheating.
5. Ensure that the projector switch is in the "Off" position (indicated by the symbol "0").
6. If you need to mount the projector, refer to the mounting instructions provided in the user manual.
7. If you are using the projector for the first time, make sure to insert a compatible bulb (120V, 23W or 220V/240V, 23W) into the projector. Note that the bulb is not included and needs to be purchased separately.
8. Once the bulb is inserted, turn on the projector by switching it to the "On" position (indicated by the symbol "I").
9. Adjust the focus and position of the projected image using the focus and positioning controls on the projector.
10. When you are finished using the projector, turn it off and unplug it from the electrical outlet.
Please refer to the Artograph EZ Tracer Projector User's Guide for more detailed instructions and safety precautions.
Add New Comment