User Manual Q&AAnswer
Jan 27, 2025 - 10:07 AM
To change the autofocus mode on the Fujifilm X-T20 Mirrorless Digital Camera, follow these steps:
1. Press the "AF" button on the top of the camera.
2. Use the rear command dial or the touchscreen to navigate to the desired autofocus mode.
3. Press the rear command dial or tap on the touchscreen to select the autofocus mode.
The available autofocus modes on the X-T20 include:
- Single Point AF: Allows you to manually select a single focus point.
- Zone AF: Divides the frame into a grid of focus areas, and you can select a zone to focus on.
- Wide/Tracking AF: Automatically tracks and focuses on a subject moving across the frame.
- All: Uses all available focus points to focus on the subject.
You can also customize the autofocus settings further by accessing the AF-C Custom Settings or AF-S Custom Settings in the camera menu. Refer to the user manual for more information and detailed instructions on customizing autofocus settings.
Please note that the exact steps and options may vary slightly depending on the firmware version of your camera. It is recommended to refer to the user manual for the most accurate and up-to-date instructions.
Add New Comment