User Manual Q&AAnswer
Jan 27, 2025 - 08:12 AM
To connect your Chamberlain B4613T Smart Garage Door Opener to your Wi-Fi network, please follow the steps below:
1. Ensure that your Wi-Fi network is functioning properly and that you have the network name (SSID) and password available.
2. Press and hold the Settings button on the opener until the LED light turns blue (about 6 seconds). This puts the opener into Wi-Fi setup mode.
3. Open the Chamberlain MyQ app on your smartphone or tablet and log in to your account. If you don't have an account, you can create one by following the app's instructions.
4. Tap the "+" button to add a new device and select "Garage Door Opener" from the list.
5. Follow the on-screen instructions to scan the QR code on the opener or manually enter the serial number located on the opener.
6. Select your Wi-Fi network from the list of available networks and enter the password when prompted. Make sure you choose the correct network and enter the password correctly.
7. Wait for the app to connect the opener to your Wi-Fi network. This process may take a few minutes.
8. Once the connection is established, you will see a confirmation message on the app. You can now control your garage door opener remotely using the app.
For more detailed instructions and troubleshooting tips, please refer to the Chamberlain B4613T Smart Garage Door Opener user manual, specifically the section on Wi-Fi setup. You can access the manual using the link provided above.
Add New Comment