User Manual Q&AAnswer
Jan 27, 2025 - 06:25 AM
To install the Google RB-YRD540-WV-619 Smart Lock for Keyless Entry, follow these steps:
1. Before you begin, open the door and remove your existing deadbolt.
2. Double-check your door prep measurements.
3. Prepare the door and frame if necessary, which is only required for new doors or adjusting existing prep.
4. Install the deadbolt by following the provided instructions.
5. Install the strike plate according to the instructions.
6. Install the keypad onto the door.
7. Install the interior mounting plate.
8. Remove the battery cover.
9. Attach the cable as instructed.
10. Install the inside lock.
11. Test the operation of the lock to ensure it functions properly.
12. Install the batteries and handle the lock as instructed.
13. Install the cover to complete the installation.
For more detailed instructions and troubleshooting information, you can refer to the Google RB-YRD540-WV-619 Smart Lock for Keyless Entry owner's guide available at www.ShopYaleHome.com/NestYaleLock/lnfo. Additionally, you can contact Yale Locks & Hardware Product Support at 1-855-213-5841 or visit www.yalehome.com for further assistance.
Add New Comment