User Manual Q&AAnswer
Jan 27, 2025 - 06:07 AM
To connect the GPX PJ308W Mini Projector to your devices, follow these steps:
1. HDMI Connection:
- Use an HDMI cable (not included) to connect the HDMI input on the projector to the HDMI output on your device (computer, Blu-Ray player, etc.).
- Set the projector's Source to HDMI.
- Use the controls on your connected device to select and play media.
2. Audio/Video Input:
- Use a 3.5mm to 3 x RCA audio/video adapter (included) and an RCA audio/video cable (not included).
- Connect the 3.5mm to 3 x RCA audio/video adapter to the AV input on the projector.
- Connect the 3.5mm to 3 x RCA audio/video adapter to an RCA audio/video cable, then connect the RCA audio/video cable to the RCA stereo audio outputs and composite video output on your media player.
- Set the projector's Source to AV IN.
- Use the controls on your connected player to select and play media.
3. Computer Video (VGA):
- Use a VGA cable (not included) and a desktop PC or laptop with a VGA output.
- Connect the VGA input on the projector to the VGA output on your computer using the VGA cable.
- Set the projector's Source to PC-RGB.
- Use the controls on your computer to select and play media. Note that VGA connections do not support audio, so you will need to use your computer's speakers for audio.
4. External Audio:
- Use a 3.5mm to RCA stereo cable (not included).
- Connect the Audio Out on the projector to external powered speakers using the 3.5mm to RCA stereo cable.
- The projector will automatically detect the connection and send audio signal to the speakers.
5. USB Storage Device:
- Load a USB drive (up to 32GB) into the USB port on the projector.
- Set the Source to USB.
- Use the Arrow/OK buttons on the projector's remote control to select and play content from the connected USB thumb drive.
Please refer to the user guide provided with the GPX PJ308W Mini Projector for more detailed instructions and troubleshooting tips.
Add New Comment