User Manual Q&AAnswer
Jan 27, 2025 - 05:54 AM
To install the Shelly E00D Smart WiFi RGB plus White Light, follow these steps:
1. Make sure the power is off before installing the device into the light socket.
2. Read the accompanying documentation carefully and completely before beginning the installation.
3. Plug the Shelly E00D into the light socket and turn the light on.
4. If the light of the bulb is not blue or you want to add the device to another Wi-Fi network, turn the bulb on and off five times to reset it into Access Point Mode.
5. Open the Shelly Cloud mobile application and choose "Add Device".
6. Enter the name (SSID) and password for the Wi-Fi network you want to add the device to.
7. If using iOS, press the Home button of your iPhone/iPad/iPod, open Settings > Wi-Fi, and connect to the Wi-Fi network created by the Shelly device. If using Android, your phone/tablet will automatically scan and include all new Shelly devices in the Wi-Fi network you are connected to.
8. After successful device inclusion to the Wi-Fi network, a list of discovered devices will be displayed in the "Discovered Devices" room.
9. Enter the Discovered Devices and choose the device you want to include in your account.
10. Enter a name for the device, choose a room, and press "Save Device".
11. To enable connection to the Shelly Cloud service for remote control and monitoring of the device, press "yes" on the following pop-up.
For more detailed instructions and settings, refer to the Shelly E00D Smart WiFi RGB plus White Light User Guide.
Add New Comment