User Manual Q&AAnswer
Jan 27, 2025 - 05:44 AM
To change the autofocus mode on the Fujifilm X-T3 Mirrorless Digital Camera, follow these steps:
1. Press the AF-ON button on the back of the camera to activate the autofocus function.
2. Use the Focus Lever (located on the rear of the camera) to select the desired autofocus mode. The available autofocus modes are as follows:
- Single Point AF: Allows you to manually select a single focus point.
- Zone AF: Divides the focus area into a larger zone and automatically selects the focus point within that zone.
- Wide/Tracking AF: Automatically tracks and maintains focus on a moving subject.
- All: Uses all available focus points to achieve focus across the entire frame.
3. Use the rear command dial or the touchscreen (if enabled) to move the focus point to the desired area of the frame.
Please note that the exact steps and options may vary depending on the camera's firmware version and settings. For more detailed information and illustrations, refer to the Fujifilm X-T3 Mirrorless Digital Camera User Manual, specifically the "Autofocus Mode" section.
Add New Comment