User Manual Q&AAnswer
Jan 27, 2025 - 05:39 AM
To install the COUGAR 550 GEC SNOW Power Supply, please follow these steps:
1. Before starting the installation, make sure to read the warnings and safety notes in the manual.
2. Place the power supply unit (PSU) into its designated place within the PC case and fix it with the supplied screws.
3. Insert the plugs for the mainboard supply (20/24 pin, 4 pin, and possibly 8 pin) into the respective slots on the motherboard.
4. Connect the disk drives and, if necessary, the graphics cards to the PSU.
5. Close the PC case and ensure that the PSU power switch is set to the position "0".
6. Connect the PSU to the power network using the supplied power cord. Only use the power cord provided in the package.
7. Turn on the PSU and then start your PC.
For more detailed instructions and illustrations, please refer to the "Installation/Accessories" section in the COUGAR 550 GEC SNOW Power Supply User Manual.
Add New Comment