User Manual Q&AAnswer
Jan 27, 2025 - 05:35 AM
Cleaning the water tank of the Black+Decker ICR2010 Vitessa Advanced Steam Cord Reel Iron is important to maintain its performance. Here are the steps to clean the water tank:
1. Ensure that the iron is unplugged and has completely cooled down.
2. Open the water-fill cover located on the iron's body.
3. Fill the water tank with warm water, filling it below the "MAX" fill line.
4. Add a small amount of vinegar or lemon juice to the water in the tank. This will help remove mineral buildup.
5. Close the water-fill cover securely.
6. Plug in the iron and turn it on to the highest temperature setting.
7. Allow the iron to heat up and steam for a few minutes, allowing the vinegar or lemon juice mixture to circulate through the iron's steam system.
8. Unplug the iron and let it cool down.
9. Empty the water tank by holding the iron upside down over a sink until all the water has emptied.
10. Rinse the water tank thoroughly with clean water to remove any remaining vinegar or lemon juice.
11. Wipe the exterior of the iron with a soft, damp cloth.
12. Allow the iron to dry completely before using it again.
By following these steps, you can effectively clean the water tank of your Black+Decker ICR2010 Vitessa Advanced Steam Cord Reel Iron and maintain its performance.
Add New Comment