User Manual Q&AAnswer
Jan 27, 2025 - 05:27 AM
To set up the hygger HG-963 Aquarium Truck Bubble Light Decoration, follow these steps:
1. Soak the bubble light decoration in water for 10-15 minutes before first use.
2. Clip the bubble light into the hole.
3. Connect the air tube to the outlet of the air pump.
4. Place the bubble light in the desired location in your aquarium.
5. Clip the wire and the air tube into the slot.
6. Position the air pump higher than the water level of the tank.
7. Plug in the bubble light decoration and the air pump.
Please refer to the user manual for more detailed instructions and safety precautions.
Note: Ensure that the working voltage is compatible with the prescribed voltage of the transformer. The transformers are not waterproof, so keep them away from water. Do not touch the transformer with wet hands. If the product is not working normally, check the working voltage and power. The air pump must be placed higher than the water level of the tank or equipped with another check valve on the air tube to prevent back-flow when the power is off.
For any further assistance or troubleshooting, you can contact the brand owner, Shenzhen Mago Trading Co., Ltd, through their website or email provided in the manual.
Add New Comment