User Manual Q&AAnswer
Jan 27, 2025 - 05:18 AM
To install and set up the KASTA KB36RGBTWS5M RGB Tuneable White LED Strip, please follow the instructions below:
1. Unpack the LED strip kit and ensure that all components are included: driver with flex and plug, KASTA in-line controller, and the 5m LED strip.
2. Make sure the power supply is disconnected before proceeding with the installation.
3. Connect the LED strip to the driver using the provided connectors. Ensure that the connections are secure.
4. Connect the driver to the power supply. Make sure to follow the correct polarity (positive and negative) for the connections.
5. Download and install the KASTA app on your iOS or Android device from the respective app store.
6. Open the KASTA app and follow the on-screen instructions to set up an account and connect to the Bluetooth® mesh network.
7. Once connected, you can control the LED strip using the app. You can adjust the color, brightness, and other settings according to your preference.
8. Additionally, you can use the in-line controller or KASTA remote switch devices to turn the LED strip on/off, dim the lights, or access other functionalities. Please refer to the user manual for detailed instructions on using these control options.
It is important to note that KASTA RGB devices should not be connected to any Phase-Cut (Leading/Trailing Edge & Universal) dimmers, as mentioned in the specifications.
For any further assistance or troubleshooting, please refer to the user manual provided with the product or contact KASTA customer support.
Add New Comment