User Manual Q&AAnswer
Jan 27, 2025 - 05:16 AM
To turn on the Fair-Play FB-8127-2 Football Scoreboard, follow these steps:
1. Locate the main disconnect switch, which is usually mounted near the scoreboard or on one of the support columns.
2. Turn on the scoreboard's main disconnect switch.
3. If you have a wired system, the scoreboard should detect a signal from the control. If it doesn't, a roving segment will move around the digits of the scoreboard.
4. If you have a wireless system with a Fair-Play Wireless Gen 2 system, the scoreboard will display its receiver's operating channel for 30 minutes if it doesn't detect a control signal within five seconds after powering up.
5. If after 30 minutes the scoreboard still isn't receiving any signal, the channel number will disappear and a roving segment will move around the digits of the scoreboard.
6. Make sure to also turn on the control that is compatible with your scoreboard. When the scoreboard is properly receiving data from the control, the scoring data (time, score, fouls, etc.) will appear on the scoreboard.
Please refer to the control user guide for additional information on operating the control and programming the scoreboard for the correct sport and scoreboard type.
(Source: FAIR-PLAY FB-8127-2 Football Scoreboard Instruction Manual)
Add New Comment