User Manual Q&AAnswer
Jan 27, 2025 - 04:36 AM
To connect your AUDEZE LCD Planar Magnetic Headphones, follow these steps:
1. Look for the (L) and (R) indicators on the cable ends. These indicators should match the headphone's (L) and (R) inputs located on the headband adjusting block.
2. The connectors will only fit in one orientation. Once you find the proper orientation, push the connector in until you hear an audible "click" to ensure it is properly engaged.
3. To remove the connector, press down on the small black (L) and red (R) buttons and gently pull the connector straight back.
Please refer to the "Connecting Your Headphones" section in the user manual for visual illustrations and additional information.
Note: It is important to ensure the correct orientation and proper engagement of the connectors to avoid any audio issues.
Add New Comment