User Manual Q&AAnswer
Jan 27, 2025 - 04:30 AM
To install the ITC 69641 Vertical Nav Light, please follow these steps:
1. Disconnect power: Before installing, adding, or changing any component, make sure to disconnect the power source.
2. Safety precautions: Account for all parts and destroy all packing materials to avoid hazards, especially for children. Ensure that the luminaire assembly is not installed closer than 6 inches from any combustible materials. If the attached wire leads are not rated to handle the maximum current, positive (+) outputs require a fuse. All electrical connections should be made inside a watertight junction box.
3. Dimension: If the bezel is not already disassembled, remove it. Determine the installation location for your light and drill a 0.5-inch hole at that spot.
4. Connect wires: Connect the wires to the power source.
5. Secure the light: Feed the wires back through the hole and xxxx the light in place using the screws provided.
6. Reattach bezel: Once the light is securely in place, reattach the bezel.
For further assistance or warranty information, please visit the ITC website at www.itc-us.com/warranty-return-policy or contact their customer service at 616.396.1355.
Add New Comment