User Manual Q&AAnswer
Jan 27, 2025 - 04:22 AM
To set the timer on the JOCEL NSBK-200WS2 Wall Mounted Ceramic Heater, follow these steps:
1. Press the "ON/OFF" button on the remote or on the machine to turn on the power. The standby symbol will light up on the display.
2. Press the button to switch gears on the remote. Press it once to control the low-grade 1 sun mark light, which means 1000W. Press it twice to control the high-grade 2 sun mark light, which means 2000W. Press it three times to control the automatic function (the default temperature is 20 degrees). If the room temperature is above 20 degrees, cool air will come out instead of heating. If the room temperature is below 20 degrees, hot air will come out.
3. To set the weekly timing, press the "ON/OFF" button on the remote. The switch indicator light will be on. The flame indicator light will be on when the product is powered on, indicating the maximum power output. The default timer key is "00.00", the default number of days is "SUN", and the temperature display shows the room temperature.
4. Press the "Heating" button to adjust the product's high and low heating mode. Two indicator lights will be on for high-grade, and one indicator light will be on for low-grade. The temperature display digital screen will flash for 10 seconds.
5. Use the "+" button to confirm the real-time day of the week, and use the "button to confirm the real-time hour (from 01 to 24 hours) and minute (from 01 to 60 minutes).
6. Use the "button to set a certain time for the heater to turn on or off.
7. Use the "button to enter the weekly timing mode. Use the +/- buttons to adjust the corresponding parameters. Use the / buttons to switch ON/OFF (ON is for certain timing start, OFF is for certain timing shutdown). Use the / buttons to adjust the hour and minute to set the timing start and timing shutdown time. You can separately set the timing boot or timing shutdown time. If the timing shutdown time is less than the scheduled boot time, the product will first execute the timing boot and then perform the timing shutdown.
8. Use the "button to select timing (ON) or timing (OFF). Press the "button to reset the weekly timing time setting.
9. The backlight display will only show the time and standby buttons after 60 seconds. The standby button will flicker every 3 seconds. Press any button to light up the display screen.
Please refer to the instruction manual for more detailed information and illustrations on setting the timer for the JOCEL NSBK-200WS2 Wall Mounted Ceramic Heater.
Add New Comment