User Manual Q&AAnswer
Jan 27, 2025 - 03:30 AM
To set the time and date on the hama 00186421 Full Touch Weather Station, follow these steps:
1. Press and hold the "A" button on the base station for about 3 seconds to enter the settings mode.
2. Use the arrow buttons (D) or (E) to navigate through the settings options.
3. Select the "Time" option and press the "A" button to confirm.
4. The hour display will start flashing. Use the arrow buttons to set the desired hour and press the "A" button to confirm.
5. The minute display will start flashing. Repeat the same process to set the minutes.
6. After setting the time, you can proceed to set the date. Select the "Date" option and follow the same steps to set the day, month, and year.
7. Once you have set the time and date, the clock will automatically exit the settings mode after 20 seconds of inactivity.
Note: The hama 00186421 Full Touch Weather Station can automatically set the time and date using the DCF signal. If the signal is not received, you can manually set the time and date as described above.
For more detailed instructions and additional settings, please refer to the instruction manual provided with the product.
Add New Comment