User Manual Q&AAnswer
Jan 27, 2025 - 02:20 AM
To connect the TECHly 4K 60 HZ HDMI Extender, follow these steps:
1. Connect the source device (e.g., PC, DVR, NVR) to the HDMI IN port of the transmitter using an HDMI cable.
2. Connect the HDMI output port of the receiver to your display device (e.g., TV, projector) using another HDMI cable.
3. Use a Cat6/6A/7 cable to connect the RJ45 port of the transmitter and receiver.
4. If you want to use HDMI loop out, connect the display device to the HDMI OUT port of the transmitter.
5. If you want to use IR passthrough, plug the IR blaster extension cable into the IR OUT port of the transmitter and the receiver extension cable into the IR IN port of the receiver.
6. If you need to output audio, connect the speaker to the L/R port using a 3.5 mm stereo audio cable.
7. Finally, plug the power supply into the device to power it on.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment