User Manual Q&AAnswer
Jan 27, 2025 - 02:19 AM
To connect the Kruger Matz KM0510 2.0 bookshelf active speakers to your audio source, follow these steps:
1. Make sure the equipment is turned OFF before making any connections.
2. Locate the audio input on the rear panel of the speakers.
3. Connect the audio output of your audio source (such as a smartphone, computer, or CD player) to the audio input of the speakers using an appropriate cable. The manual does not specify the type of cable required, so you may need to check the audio output options of your audio source and choose a compatible cable (e.g., RCA-to-RCA, 3.5mm-to-RCA, etc.).
4. Once the audio source is connected, turn on the speakers and your audio source.
5. Adjust the volume control xxxx on the front panel of the speakers to the desired level.
Note: Be sure to match the speaker cord to the appropriate jacks on components: „+” to „+” , and „-” to „-”.
If you encounter any issues or need further assistance, it is recommended to contact an authorized service point for check-up/repair.
Add New Comment