User Manual Q&AAnswer
Jan 27, 2025 - 01:07 AM
To adjust the speed and temperature settings on the Aigostar Linda 320000GQT Hair Dryer, follow these steps:
1. Ensure that the hair dryer is plugged into a power outlet and the switch is set to the "OFF" position.
2. Locate the switch control on the hair dryer. It should have three positions: "0" (OFF), "1" (Low speed/Hot wind), and "2" (High speed/Hot wind).
3. To use the low speed setting for styling, turn the switch to position "1". This setting provides a gentler airflow.
4. To use the high speed setting for drying hair, turn the switch to position "2". This setting provides a stronger airflow.
5. Before using the hair dryer, make sure the air outlet and the inlet grille are clear of any obstructions.
6. After use, switch off the hair dryer and remove the plug from the socket. It is important to pull the plug and not the cord to avoid damage.
Please refer to the instruction manual for additional safety precautions, maintenance, and cleaning instructions.
Add New Comment