User Manual Q&AAnswer
Jan 27, 2025 - 01:03 AM
To properly inflate the F2 Inflatable Stand Up Paddle Board, follow these steps:
1. Choose a smooth and clean surface with enough space to unpack and unfold the SUP.
2. Make sure all parts are present and in perfect condition.
3. Attach the air pump with pressure gauge to the valve on the SUP.
4. Inflate the SUP using a foot pump or double-stroke piston pump with appropriate attachments and pressure gauges.
5. Open the valve and start pumping air into the SUP.
6. Inflate the SUP completely, reaching the recommended operating pressure of 1 bar (15 psi).
7. Close the valve tightly and remove the pump from the SUP.
8. Check the SUP for any leaks by applying a little soapy water around the valve and seams. If bubbles form, there may be a leak that needs to be repaired.
9. If the SUP loses air, check the valve and tighten it if necessary. If the problem persists, use the repair kit provided to fix any leaks.
Note: Do not use a compressor or compressed air bottle to inflate the SUP, as this can cause damage.
Add New Comment