User Manual Q&AAnswer
Jan 27, 2025 - 12:57 AM
To install the CONNECTS2 Vision CAM-3 Mobile camera, please follow these steps:
1. Connect the Black wire to a suitable ground and the Red wire to a switched +12V supply.
2. If the camera is to be used in the rear of the vehicle, connect the Red wire to the reversing light circuit or an interface that provides a reverse signal.
3. Select a suitable location for the camera, ensuring that the area is free from cables, fuel, and oil.
4. Whenever possible, avoid locations that are subject to road dirt and water spray.
5. Remove the protective backing from the adhesive pad and place the camera in the desired position.
6. Use the supplied video cable to connect the camera to the display screen and ensure that the image is displayed correctly.
7. Adjust the camera if necessary to achieve the correct angle of the image.
Please refer to the CONNECTS2 Vision CAM-3 Mobile User Manual for more detailed instructions and illustrations.
Add New Comment