How do I install the Progress Lighting P300386 1LT Bath Bracket? (Progress Lighting P300386 1LT Bath Bracket Instruction Manual)

Answer

manuals.plus

Jan 26, 2025 - 11:59 PM


To install the Progress Lighting P300386 1LT Bath Bracket, please follow the steps below:

1. Before starting the installation, ensure that you have all the necessary parts mentioned in the package contents section of the manual.

2. Turn off the electricity at the main circuit breaker panel before beginning the installation.

3. Attach the back plate (CC) to the outlet box using the mounting screws provided with the outlet box. Make sure to tighten it securely.

4. Strip 3/8" of insulation from the ends of the electrical wires. Connect the WHITE fixture wire to the WHITE supply wire from the outlet box using a wire nut (BB). Similarly, connect the BLACK fixture wire to the BLACK supply wire from the outlet box. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening it to the ground  xxxx  on the back plate. Carefully push all the wire connections into the outlet box.

5. Attach the fixture (A) onto the back plate (CC) using the screws (AA). Ensure that the fixture is tightened securely against the mounting surface.

6. Attach the glass shades (B) to the fixture (A) using the socket rings (C) to secure them moderately tight.

7. Thread the lamp (not included) into the fixture socket. Use a 60-watt MAX incandescent medium base lamp, SBCFL, or SBLED.

Please refer to the instruction manual for any additional information or specific details related to the installation process.