User Manual Q&AAnswer
Jan 26, 2025 - 11:40 PM
To connect the Sengled Wi-Fi Smart Light Bulbs to your Wi-Fi network, please follow these steps:
1. Make sure you have downloaded the latest version of the Sengled Home App from the Apple App Store or Google Play Store.
2. Register a Sengled account using the Sengled Home App.
3. Ensure that the power is turned off for the light socket where you want to install the bulb.
4. Twist the Sengled Wi-Fi Smart Light Bulb into the socket.
5. Turn on the power.
6. Open the Sengled Home App and go to Devices.
7. Use the "+" button to add a new device.
8. Follow the instructions provided in the app to complete the installation process.
If you are still unable to connect the bulbs to your Wi-Fi network, please make sure of the following:
- Ensure that you are connecting to a 2.4GHz Wi-Fi network. The Sengled Wi-Fi Smart Light Bulbs do not work with networks other than those with 2.4GHz.
- Check if your Wi-Fi network has any special settings or restrictions that may be preventing the bulbs from connecting. Contact your internet service provider (ISP) for assistance in identifying any issues with your Wi-Fi network.
- If you are using a Wi-Fi extender or mesh network, try connecting the bulbs directly to your main router to see if that resolves the issue.
- Reset the bulbs by turning them on and off five times in quick succession. Then, try the connection process again.
If you continue to experience difficulties, please refer to the full user manual available at support.sengled.com or contact Sengled customer service for further assistance.
Add New Comment