User Manual Q&AAnswer
Jan 26, 2025 - 11:40 PM
To install the Nuna AACE lx Car Seat using the ISOFIX system, please follow these steps:
1. Attach the ISOFIX guides onto the vehicle ISOFIX anchor bars.
2. Pull and hold the ISOFIX adjusting button to pull out the ISOFIX connectors.
3. Rotate the ISOFIX connectors 180 degrees until they are pointing toward the ISOFIX guides.
4. Line up the ISOFIX connectors with the ISOFIX guide, and then click both ISOFIX connectors into the ISOFIX anchor bars.
5. Make sure that both ISOFIX connectors are securely attached to the vehicle’s ISOFIX anchor bars. There should be two audible clicks and the colors of the indicators on both ISOFIX connectors should be completely green.
6. Check to make sure the booster is securely installed by pulling on both ISOFIX connectors.
To remove the Nuna AACE lx Car Seat, press the secondary lock button first, followed by the button on the ISOFIX connectors before removing the booster from the vehicle seat. Rotate the ISOFIX connectors by 180 degrees, then pull and hold the ISOFIX adjusting button to store the ISOFIX connectors.
Please refer to the Nuna AACE lx Car Seat Instruction Manual for detailed instructions and illustrations on the installation process.
Add New Comment