User Manual Q&AAnswer
Jan 26, 2025 - 11:35 PM
Yes, you can connect the Klipsch R-12SW subwoofer to your soundbar. The most common way to do this is by using the subwoofer output on your soundbar, if it has one. Here are the steps to connect the subwoofer:
1. Check if your soundbar has a subwoofer output labeled "Sub Out" or "Subwoofer Out". If it does, you will need a subwoofer cable (also known as an RCA cable) to make the connection.
2. Connect one end of the subwoofer cable to the subwoofer output on your soundbar.
3. Connect the other end of the subwoofer cable to the "LEFT/LFE" input on the Klipsch R-12SW subwoofer.
4. Make sure the subwoofer is plugged into a power outlet.
5. Turn on both the soundbar and the subwoofer.
6. Adjust the volume level of the subwoofer to match the output of your soundbar. You can do this by using the volume control on the subwoofer or through the settings on your soundbar.
Please refer to the Klipsch R-12SW owner's manual for more detailed instructions and troubleshooting tips.
Add New Comment