User Manual Q&AAnswer
Jan 26, 2025 - 11:34 PM
The brake lines on the OZONE RAPIDO 3 Paraglide have been carefully set during testing, but if you choose to adjust their length, please keep the following in mind:
- Ensure both main brake lines are of equal length.
- If a brake handle has been removed, check that its line is routed through the pulley when it is replaced.
- When the brakes are fully released in flight, the brake lines should be slack. There must be a substantial bow in them to guarantee no deformation of the trailing edge when accelerated.
- There must be a minimum of 10cm of free play before the brakes begin to deform the trailing edge. This prevents the trailing edge from being deformed when using the speed system.
It is important to note that adjusting the brake lines can affect the handling and performance of the wing, so it is recommended to consult with an experienced pilot or your local dealer before making any adjustments.
Add New Comment