User Manual Q&AAnswer
Jan 26, 2025 - 11:32 PM
To install the MONOPRICE Essential Single Monitor Desk Mount on your desk, please follow these steps:
STEP 1: Fitting the bottom support on the desk
- Place the bottom support on your desk in the desired position.
- Ensure that the desk is capable of supporting the weight of the mount and the monitor.
STEP 2: Install Monitor Plate
- Attach the monitor plate to the tube using the provided screws.
- Tighten the screws securely to ensure a stable connection.
STEP 3: Attaching Screen to Monitor Plate
- Place your monitor on the monitor plate.
- Use the provided screws to attach the monitor to the plate.
- Make sure the screws are tightened securely, but do not overtighten.
STEP 4: Adjusting Screen
- Once the monitor is attached, you can adjust the screen to your desired position.
- Use the xxxx provided to tighten or loosen the tension of the mount.
- Adjust the height, tilt, and swivel of the monitor as needed.
Remember to check the installation every two months to ensure that all screws are tight and the mount is secure.
For further assistance or if you are unsure about any part of the installation process, it is recommended to contact a professional installer for help.
Please refer to the MONOPRICE Essential Single Monitor Desk Mount user manual for more detailed instructions and illustrations.
Add New Comment