User Manual Q&AAnswer
Jan 26, 2025 - 11:26 PM
To install the AXOR 39119330 Citterio Single lever basin mixer for concealed, please follow the instructions below:
1. Start by turning off the water supply to the basin.
2. Prepare the wall for installation by ensuring it is clean and free from any debris.
3. Locate the concealed installation set that is compatible with the AXOR 39119330 Citterio Single lever basin mixer. The installation set is not included with the product and needs to be purchased separately.
4. Follow the instructions provided with the installation set to prepare the wall for installation. This may involve cutting holes in the wall and connecting the necessary plumbing.
5. Once the installation set is in place, insert the ceramic cartridge into the concealed installation set.
6. Attach the AXOR 39119330 Citterio Single lever basin mixer to the concealed installation set, ensuring it is securely fastened.
7. Connect the water supply lines to the mixer, ensuring they are tightened properly.
8. Position the handle of the mixer on either the right or left side, depending on your preference and the installation of the basic set.
9. Turn on the water supply and check for any leaks. If there are any leaks, tighten the connections as necessary.
10. Test the functionality of the mixer by turning the handle to control the water flow and temperature.
11. The AXOR 39119330 Citterio Single lever basin mixer also features QuickClean technology for easy limescale removal. Simply rub the nozzles with your fingers to remove any limescale buildup.
Please note that these instructions are a general guide and it is always recommended to refer to the specific installation manual provided with the product for detailed instructions and any additional steps that may be required.
Add New Comment