User Manual Q&AAnswer
Jan 26, 2025 - 11:20 PM
To connect the DVDO iScan Mini 4K-Scaler to your display, follow these steps:
1. Ensure that both the iScan Mini and your display are powered off.
2. Connect one end of an HDMI cable to the HDMI output port on the iScan Mini.
3. Connect the other end of the HDMI cable to an available HDMI input port on your display.
4. Power on your display.
5. Power on the iScan Mini.
Once the iScan Mini and your display are powered on and connected, you should see the output from the iScan Mini on your display. Make sure to select the correct HDMI input on your display to view the iScan Mini's output.
For more detailed instructions and troubleshooting information, please refer to the DVDO iScan Mini 4K-Scaler Display Setup user manual provided in the link above.
Add New Comment