User Manual Q&AAnswer
Jan 26, 2025 - 11:18 PM
To install and hang the QAZQA Hatch HL 45 Hanging Lamp, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Unpack the lamp and make sure all the components are included.
2. Before installation, ensure that the power supply is turned off.
3. Choose a suitable location for the lamp, ensuring it is securely attached to a ceiling or other suitable surface.
4. Use a suitable screwdriver to remove the screws on the lamp's canopy.
5. Connect the wires from the ceiling to the corresponding wires on the lamp. Make sure to match the colors of the wires (e.g., black to black, white to white).
6. Use wire connectors or twist the wires together and secure them with electrical tape.
7. Carefully tuck the wires into the canopy and attach the canopy back to the lamp using the screws.
8. Once the lamp is securely attached, turn on the power supply and test the lamp to ensure it is working properly.
Please note that these instructions are a general guide. It is always recommended to refer to the specific instructions provided in the QAZQA Hatch HL 45 Hanging Lamp Instruction Manual for accurate and detailed installation steps.
Add New Comment