Answer

Jan 26, 2025 - 11:17 PM
To assemble the ROTOL RP-2500 Belt Drive Turntable, follow these steps:
1. Set the turntable body on a flat surface in a suitable location.
2. Clean any dust and oil from the belt around the drive rim of the turntable.
3. Place the turntable onto the turntable body and loop the belt around the capstan and the drive rim, ensuring the belt is on the neck of the capstan.
4. Set the blank section of the center gear opposite the turntable shaft by manually rotating the gear. Push the trip of the gear inward.
5. Fit the turntable platter firmly onto the turntable body.
6. Place the rubber mat on the turntable platter.
7. Plug the headshell into the front end of the tonearm and secure it by turning the lock clockwise.
8. Insert the counter-weight into the end portion of the tonearm and adjust its position as needed.
9. Pass the string of the string-counter weight through the anti-skating guide and hook it up to the anti-skating gauge bar at the inner-most notch temporarily.
Please refer to the owner's manual for more detailed instructions and illustrations on assembling the ROTOL RP-2500 Belt Drive Turntable.
Add New Comment