User Manual Q&AAnswer
Jan 26, 2025 - 10:57 PM
To pair the Furrion FOS07TAPM Vision S Camera System with the monitor, follow these steps:
1. Ensure that both the camera and the monitor are turned on.
2. Press the MENU button on the right side of the monitor to enter the setup menu.
3. Tap on the PAIRING option to enter pairing mode.
4. On the camera, locate the MONITOR PAIRING button (rear camera shown) and press it to initiate the pairing process.
5. The monitor will search for the camera and establish a connection. Once the pairing is successful, the camera's video feed will be displayed on the monitor.
6. If you have multiple cameras, repeat steps 4 and 5 for each camera you want to pair with the monitor.
7. Make sure to erect the antennas (if available) on both the camera and the monitor to ensure a strong wireless signal.
Note: If the camera and monitor are already bundled together, they should be paired by default. In this case, you can skip the pairing process and the camera's video feed should already be displayed on the monitor.
For more detailed instructions and information, please refer to the user guide provided with the Furrion FOS07TAPM Vision S Camera System.
Add New Comment